Blava's sensor installation

On this page you will find basic setup instructions for Blava and Inspira’s  air and ambient quality sensor.

Step-by-step installation

Follow the steps to configure the sensor correctly:

  • Connect the power supply to the sensor.
  • Hold down the back button of the device for 5 seconds or until the LED stops flashing.
  • Open the WiFi settings of your smartphone or computer until appears a network similar to Blava_********. Click on the network.
  • The first time, you will need to enter the following password: 12345678.
  • Once connected to Blava's WiFi network, click on the menu option with the three parallel lines, as shown in the following image:
  • Select the "Add WiFi network" option (you will need to click a couple of times).
  • Select the WiFi network to which you want to connect the sensor.
  • Enter the password of the selected WiFi network.
  • Wait until the application shows you that the WiFi network has been connected successfully. Then, reset the sensor by turning it off and on again. If the sensor has been configured correctly, the blue LED will stay on without flashing.

If you are experiencing problems with the installation of Blava’s sensor, please contact our technical service using this form.